Author Topic: Step one?  (Read 627 times)

Offline Xairbusdriver

  • Administrator
  • TS Addict
  • *****
  • Posts: 26347
  • 27" iMac (mid-17), Big Sur, Mac mini, Catalina
    • View Profile
    • Mid-South Weather
Step one?
« on: September 13, 2019, 12:10:06 PM »
Saw last night that the light on my scanner was OFF. That is the normal indication after my Mac has shutdown. Normally, the light (power) is always ON if the Mac is ON, when the Mac shuts down, it also kills the outlet on the APC UPS for the scanner. Difference last night was that it was well before the scheduled shutdown time. "I'll work on this tomorrow. (well past) Time for my beauty rest!

Sure enough, the light was still OFF this morning after the Mac had restarted.
  • Unplugged/re-connected the USB cable... no change
  • Tried another USB port... no change
  • Pressed the power button... no change
  • Unplugged/replugged the power brick... no change
  • Tested the voltage of the power brick output... 25.1 volts
  • Checked Epson for updates of any software... found one dated 8/19
  • Installed new update... no change
  • Checked for warranty possibility... need serial number
  • Disconnected scanner to read serial number in small letters... yep, out of warranty
  • Returned scanner to desktop... again... reconnected cables
Uhmnnn... what is this?! A "| O" labeled rocker switch! Appears to be in the "O" position...  :wallbash: :doh: :eek:

Every trouble-shooting general guide:
Step one: Is the device ON? :whistling:

The scanner is on the extreme right-hand edge of my desk. The desk is very close to the left-hand edge of my wife's desk. It's a fairly tight squeeze to get behind either desk by gingerly moving between the desks. Obviously, someone was  slightly too wide and brushed the switch into the OFF position... :Thinking: I have a suspect in mind, but I won't reveal his name. :doh:
THERE ARE TWO TYPES OF COUNTRIES
Those that use metric = #1 Measurement system
And the United States = The Banana system
CAUTION! Childhood vaccinations cause adults! :yes:

Offline kimmer

  • Administrator
  • TS Addict
  • *****
  • Posts: 9086
    • View Profile
Re: Step one?
« Reply #1 on: September 13, 2019, 01:57:55 PM »
Obviously, someone was  slightly too wide and brushed the switch into the OFF position... :Thinking: I have a suspect in mind, but I won't reveal his name. :doh:
:rofl: :rofl: :rofl: