Post by: dolphin on April 13, 2006, 10:10:16 AM
Is this just a growing pain of the new software or do they have them turned OFF???
BTW...I love how some of the upgraded software features work...eg BOLDCOLOR
Post by: kcourt on April 13, 2006, 11:25:37 AM
It's good to be back - and the board looks so different.They didn't accept my password yesterday but today it came through loud and clear.
for all of your work to make this site even better than it was before.Kathy
Post by: Gregg on April 13, 2006, 12:20:13 PM
Maybe it has something to do with custom vs. 'smorgasbord' avatars.
Let's see...
Post by: jb on April 13, 2006, 12:22:40 PM
slow as wet cement, due no doubt to "growing pains". For your information I measured the
time to open the Posts page and also the time to open a Topic, with various browsers.
Here are the results:
I hope that by the time our growing pains are over our new board will be as fast as some other forums. Still we must thank our leaders to have such a grand outlook for our future. A hell of a good job is being done.
jb
Post by: swhitset on April 13, 2006, 01:08:08 PM
Guess I'll try back later
Steve
Post by: katscan on April 13, 2006, 02:18:15 PM
Does this mean TechSurvivors has not Survived?
I really liked it the way it was.
Must be that old saying.....
"In Spring a Young Mans fancy turns to thoughts of LOVE...ing to change things"
I.m going to try a different browser to see if it helps.
Post by: gunug on April 13, 2006, 02:30:17 PM
The lucky one's were those who have custom avatars stored somewhere else addressable as a URL; this I know. I just don't have a space, either in Flick'r or my Yahoo photos where and individual photo can be addressed by a permanent URL. I have a webpage, dedicated to my father's memory, and I suppose I could figure out how to link a one picture page to that! I'm a hardware technician not a webwacker!
Post by: MacHeadCase on April 13, 2006, 02:38:33 PM
The admins on this board had to upgrade the board software because of security reasons. The forum was under attack by vermin that would put javascript macros on the pages and force advertising and pop-up and pop-under pages to appear against the admins wishes.
The board software still needs plenty of tweaking to get it up and running faster but IPB and the admins are working on it as posted in other threads.
Now the forums should be safe again. *Phew*
QUOTE(gunug @ Apr 13 2006, 03:30 PM) <{POST_SNAPBACK}>
Maybe some of the people who have avatars can share the method by which they were established with those who haven't got them anymore! This is after everything else is working. I feel naked without one but if I can stand to run around naked then you'll all have to bare with me!
The lucky one's were those who have custom avatars stored somewhere else addressable as a URL; this I know. I just don't have a space, either in Flick'r or my Yahoo photos where and individual photo can be addressed by a permanent URL. I have a webpage, dedicated to my father's memory, and I suppose I could figure out how to link a one picture page to that! I'm a hardware technician not a webwacker!
The lucky one's were those who have custom avatars stored somewhere else addressable as a URL; this I know. I just don't have a space, either in Flick'r or my Yahoo photos where and individual photo can be addressed by a permanent URL. I have a webpage, dedicated to my father's memory, and I suppose I could figure out how to link a one picture page to that! I'm a hardware technician not a webwacker!
I simply had to reassign the link to my image that is hosted on my iDisk.
Flickr is free, why not use it to host your avatar? Same as photobucket and other free image hosting places...
Post by: jcarter on April 13, 2006, 02:57:07 PM
It is quite slow here too, but I dont think that will last, its just so new.
I did notice that way down in the right bottom corner, the time and date is given. The date is OK, the time I think is Pacific time, but the minutes are off.
Will you artists be able to create banners?
Anyway, Thank you all for this, its indeed nice.
Jane
Post by: RobW on April 13, 2006, 03:13:23 PM
katscan, I don't think the speed (or lack thereof) is a browser issue. The work on the upgrade is not complete, and there is still work being done, including getting the speed issue resolved.
Post by: gunug on April 13, 2006, 04:10:51 PM
I guess I've been lucky in that I never saw any pop-ups or whatever on my PC's or my MAC's with the old software.
Post by: MacHeadCase on April 13, 2006, 04:44:57 PM
It does!!!!
Ok how to do this with Flickr, gunug... You need to isolate the picture you want in another window. Click on your avatar that is hosted there so it goes in a window by itself. This won't really isolate your picture with an URL you can use yet. You need to right-click (or Option-click) on the image and ask for "Open image in new window". This will give you a workable URL. Flickr will add some stuff like "?v=0" at the end of your image's URL. Just delete that till you get the right file format like ".jpg" or ".gif" or whatever file format your avatar is saved as.
My example is this URL I got: http://static.flickr.com/35/111647748_e31c687855.jpg?v=0
So I delete the "?v=0" and the image tag becomes "http://static.flickr.com/35/111647748_e31c687855.jpg" and that works fine!
Post by: jcarter on April 13, 2006, 05:25:32 PM
I will work on my avitar later, I should change it, as our dear YellowLab is no longer on Earth,,,,,,,,,
I use Flickr for my blog photos, Flickr is really great.
I do use Pbase or .mac for most other things, will have to see if it works with them.
Thank you all for this info, I will have to work on it later.
I do have a bad email issue that I need help with, never encountered anything like it before, its rather awful for a Mac user. It is a PC problem, but it seems to have hit a few people using our cable ISP,,,,,But I will wait until we are up and running full speed before I ask for help with it.
Jane
Post by: Xairbusdriver on April 13, 2006, 05:36:52 PM
QUOTE
I have a webpage, dedicated to my father's memory, and I suppose I could figure out how to link a one picture page to that!
If you've got a web page, you got space on that server. That's all you need—a place to store the image. For you web page, you probably have some images as well as the html files. Just put the avatar image in with all the other images and use the Profile prefs area at TS to insert the url [http://www.yourSitesName/YourAvatar.jpg] Or, if the images are in a folder at your web space, throw in the name of the folder just before the name of the image name. Url's are almost exactly like path names to your OS X stuff; "yourHardDrive/UserX/Documents/Images/YourAvatar.gif"
Post by: beacher on April 13, 2006, 08:25:37 PM
Post by: Gregg on April 13, 2006, 09:19:46 PM
I did not see an option to automatically disable a saved signature. Seems that if you have a signature, the default is to show it and you have to click it off each time you post if you prefer to hold it in reserve for special topics. Of course, one could always take it down.
Post by: krissel on April 13, 2006, 10:36:52 PM
What you see is not the final product by any means.
The skin you all have is the default that comes with the software. We will be offering a choice of skins in the near future as we get them set up to accept our welcome banners and put in our logo, etc.
Also some tweaking is needed to get box sizes proper.
Just a note that when you reply generally to a thread, use the ADDREPLY button at the very bottom of the page. The reply box that is just below a particular post is to reply directly to that post. We didn't have that feature before and it may be confusing at first.
Post by: Bruce_F on April 13, 2006, 11:29:29 PM
QUOTE(krissel @ Apr 13 2006, 08:36 PM) <{POST_SNAPBACK}>
The reply box that is just below a particular post is to reply directly to that post. We didn't have that feature before and it may be confusing at first.
Works for me!
That is a nice feature!
You guys are doing a great job! Thank you!
Post by: adrianmoore on April 14, 2006, 04:29:58 AM
However i LOVE invision board software, and it will certainly serve TS well.
Keep up the great work!
Post by: Gregg on April 14, 2006, 04:56:21 AM
QUOTE(krissel @ Apr 13 2006, 09:36 PM) <{POST_SNAPBACK}>
Just a note that when you reply generally to a thread, use the ADDREPLY button at the very bottom of the page. The reply box that is just below a particular post is to reply directly to that post. We didn't have that feature before and it may be confusing at first.
Using that reply box below your post got me here, quoting you. (I have edited out the rest of it manually.)
I have tried the "Quote+" button, but find that confusing. It reveals that it is "Toggle multiquote addition" -whatever that means. When I click it to open a new tab, it opens a clone of the same page. Someone will have to explain the purpose of this, and how to use it for "old dogs" like me.
Post by: dolphin on April 14, 2006, 06:46:06 AM
QUOTE
I have tried the "Quote+" button, but find that confusing. It reveals that it is "Toggle multiquote addition" -whatever that means. When I click it to open a new tab, it opens a clone of the same page. Someone will have to explain the purpose of this, and how to use it for "old dogs" like me.
Gregg, the quote button on the reply screen seems to do a better job...I think!
Post by: Johanbgoot on April 14, 2006, 06:56:55 AM
For several days I had tried to open Techsurvivors without success and was saddened to think that I had lost this wonderful community where every Mac issue I have raised here has been answered with professional alacrity. Boy is it a pleasure to be here, I couldn't care less that the board is slow because I know that those who administer this board are dealing with this. I have but one request, once everything is in place and tested, etc., could we be told what are the changes/improvements. As always, great to know that my Mac lifeline is available.
Thanks,
Johanbgoot
Post by: MacHeadCase on April 14, 2006, 07:07:39 AM
I think it's simply fab!!!
And Johan, there is a partial list of what IPB 2.1 has in terms of new features in right here.
And I found some skins that IPB offers for IPB 2.1.
My favourite is this one. With a different header/banner like TS' own it would look very good. I love the colours! They look yummy!
Post by: PussEFoote on April 14, 2006, 07:38:56 AM
QUOTE
My favourite is this one. With a different header/banner like TS' own it would look very good. I love the colours! They look yummy!
Got to agree on this one!
BarbZ in OZ
Post by: MacHeadCase on April 14, 2006, 07:44:54 AM
Post by: bellbram on April 14, 2006, 07:45:31 AM
Felt quite lost without it for the past few days. Congrats Admins on a great new site. Thank you.
As for the speed, it's of secondary importance. Sure, it would be nice if it were faster (and eventually it probably will be) but the important thing is to have access.
Thanks again.
Post by: jepinto on April 14, 2006, 08:24:57 AM
Post by: kelly on April 14, 2006, 08:33:18 AM
Post by: Bruce_F on April 14, 2006, 09:00:48 AM
Post by: MacHeadCase on April 14, 2006, 09:23:26 AM
I already linked you guys to Hunters & Collectors 2.1 but I'll do it again.
Automn Skin is nice too, with a big space for the TS banners.
Another one that isn't too bad is IBR Green Style where the colours are more neutral. But I slightly prefer the other two, they have more life. More jazzy.
But... I wonder. Are these free?
Post by: gunug on April 14, 2006, 09:27:50 AM
the following tasteful image of a famous actor:
http://static.flickr.com/47/128368568_4231c27d41.jpg?v=0
And I type this into the Avatar screen in the control panel, hit <Update Avatar> and it grinds and
then acts like it did something and you wait and it goes back to the same page and the URL isn't
there and it says "noavatar". The image is 90 x 90 pixels and I've tried typing that in. Any ideas?
Post by: gunug on April 14, 2006, 09:31:01 AM
the following tasteful image of a famous actor:
http://static.flickr.com/47/128368568_4231c27d41.jpg?v=0
And I type this into the Avatar screen in the control panel, hit <Update Avatar> and it grinds and
then acts like it did something and you wait and it goes back to the same page and the URL isn't
there and it says "noavatar". The image is 90 x 90 pixels and I've tried typing that in. Any ideas?
MacHeadCase: I have tried this avatar thing again and it still doesn't seem to be working. I have
the following tasteful image of a famous actor:
http://static.flickr.com/47/128368568_4231c27d41.jpg?v=0
And I type this into the Avatar screen in the control panel, hit <Update Avatar> and it grinds and
then acts like it did something and you wait and it goes back to the same page and the URL isn't
there and it says "noavatar". The image is 90 x 90 pixels and I've tried typing that in. Any ideas?
Post by: MacHeadCase on April 14, 2006, 09:40:24 AM
QUOTE(gunug @ Apr 14 2006, 10:27 AM) <{POST_SNAPBACK}>
MacHeadCase: I have tried this avatar thing again and it still doesn't seem to be working. I have
the following tasteful image of a famous actor:
http://static.flickr.com/47/128368568_4231c27d41.jpg?v=0
And I type this into the Avatar screen in the control panel, hit <Update Avatar> and it grinds and
then acts like it did something and you wait and it goes back to the same page and the URL isn't
there and it says "noavatar". The image is 90 x 90 pixels and I've tried typing that in. Any ideas?
the following tasteful image of a famous actor:
http://static.flickr.com/47/128368568_4231c27d41.jpg?v=0
And I type this into the Avatar screen in the control panel, hit <Update Avatar> and it grinds and
then acts like it did something and you wait and it goes back to the same page and the URL isn't
there and it says "noavatar". The image is 90 x 90 pixels and I've tried typing that in. Any ideas?
Like I posted earlier... Delete the ending ?v=0 from the URL and it works in the boards between image tags so it should work for your avatar.
Plainly put, put this URL in the Enter a URL to an online avatar image field: ---> http://static.flickr.com/47/128368568_4231c27d41.jpg
and then click on Update Avatar. Just make sure your image respects the image size 90 X 90 pixels at a resolution of 72 dpi and this should work.
Post by: adrianmoore on April 14, 2006, 10:45:43 AM
, not even the in house ones, its says its updating the profile, and then when the CP comes back, No avatar is showing , BooHoo 
Post by: gmann on April 14, 2006, 10:58:10 AM
Post by: adrianmoore on April 14, 2006, 12:41:29 PM
QUOTE(gmann @ Apr 14 2006, 10:58 AM) <{POST_SNAPBACK}>
On the URL line for adding the avatar you will find Http://, erase that and use the URL line that you are trying to paste.
Nope still no work! i'll just have to be the invisible avatar!
Post by: MacHeadCase on April 14, 2006, 12:46:06 PM
Post by: adrianmoore on April 14, 2006, 01:08:52 PM
QUOTE(MacHeadCase @ Apr 14 2006, 12:46 PM) <{POST_SNAPBACK}>
Adrian have you tried hosting the image from your server? I have mine on my iDisk... Maybe you can host it from your iDisk too?
I've tried hotlinking and my personal web space with demon.net , i will give iDisk a go and see if that helps, but even the in house avatars do not work for me here, i wonder if its linked to the amount of posts?
Post by: adrianmoore on April 14, 2006, 01:25:19 PM
Post by: Gregg on April 14, 2006, 04:47:15 PM
Multiquote is so cool! Say you want to quote two people or more in your reply, you just click on the Quote + below each of those you want their quote to appear in your reply box so you can reply to each of them individually in the same post.
I think it's simply fab!!!
I tried it.
[quote name='PussEFoote' date='Apr 14 2006, 06:38 AM' post='94880']
Got to agree on this one!
BarbZ in OZ
[/quote]
And I like it!
Clicking Quote+ highlights the button. After you have the ones highlighted that you want to quote, go to the Reply button at the BOTTOM of the screen and click it.
But I did something wrong! I obviously erased the "end quote" from MHC's post, but both are there for PEF's.
Post by: MacHeadCase on April 14, 2006, 05:04:47 PM
QUOTE(adrianmoore @ Apr 14 2006, 02:08 PM) <{POST_SNAPBACK}>
I've tried hotlinking and my personal web space with demon.net , i will give iDisk a go and see if that helps, but even the in house avatars do not work for me here, i wonder if its linked to the amount of posts?
Works...
QUOTE(adrianmoore @ Apr 14 2006, 02:25 PM) <{POST_SNAPBACK}>
Nope still no joy using iDisk! must be a post / board thing
...for me...
QUOTE(Gregg @ Apr 14 2006, 05:47 PM) <{POST_SNAPBACK}>
And I like it!
Clicking Quote+ highlights the button. After you have the ones highlighted that you want to quote, go to the Reply button at the BOTTOM of the screen and click it.
But I did something wrong! I obviously erased the "end quote" from MHC's post, but both are there for PEF's.
Clicking Quote+ highlights the button. After you have the ones highlighted that you want to quote, go to the Reply button at the BOTTOM of the screen and click it.
But I did something wrong! I obviously erased the "end quote" from MHC's post, but both are there for PEF's.
...just fine! Yep, you probably deleted a quote tag somewhere...
Post by: krissel on April 14, 2006, 10:08:32 PM
I'll take a look at the avatar galleries later and see if I can see what's going on.
More skins will be available in due time.
It's going to be a long night...
Post by: Ken on April 14, 2006, 11:07:02 PM
Avatar issue:
Me too. Followed the thread to here and it appears that I'm not alone.
My avatar http://www.mirafiori.com/~kdickson/pics/comp.gif for some reason won't fly. It's only 72X70 at 72dpi. Tried all the above fixes and even moved it around to a couple of different servers.
Not sure if this helps, but this shows up at the bottom of my screen after the update script runs. It appears to be an error message.
IPB WARNING [2] (null)() [ref.outcontrol]: output handler 'ob_gzhandler' cannot be used twice (Line: 0 of Unkno
Post by: gunug on April 15, 2006, 03:09:18 AM
FYI: I did nothing different than I was doing before and I just tried it again as MacHeadCase
suggested and pasted it in without the end of the tag and I typed in the actual 90x90 size.
I also deleted the "http:" that was already in that box as per whoever else's suggestion. I
did get the same message talked about elsewhere:
IPB WARNING [2] (null)() [ref.outcontrol]: output handler 'ob_gzhandler' cannot be used twice. . .
But this time it actually worked! Must've been something you changed!
MHC - Thanks for your suggestions.
Post by: adrianmoore on April 15, 2006, 04:07:36 AM
Post by: Highmac on April 15, 2006, 06:52:03 AM
Speaking purely for myself, can I just say I don't expect a response from "the management" every time I post a comment. I'm sure they have more than enough to do and I'm just hoping added info will help their work. The bells and whistles can follow at a later date
Thanks again.
Post by: adrianmoore on April 15, 2006, 07:43:00 AM
QUOTE(Highmac @ Apr 15 2006, 06:52 AM) <{POST_SNAPBACK}>
Just to say, board is working faster today. Still no ball of fire, but much more usable (on broadband at least).
Speaking purely for myself, can I just say I don't expect a response from "the management" every time I post a comment. I'm sure they have more than enough to do and I'm just hoping added info will help their work. The bells and whistles can follow at a later date
Thanks again.
Speaking purely for myself, can I just say I don't expect a response from "the management" every time I post a comment. I'm sure they have more than enough to do and I'm just hoping added info will help their work. The bells and whistles can follow at a later date
Thanks again.
So true! and if the "managment" wants any "testing" doing just give us a nod, i'll be happy to help!
Post by: MacHeadCase on April 15, 2006, 07:49:51 AM
Oh and very nice avatar if I do say so myself!
Post by: Paddy on April 15, 2006, 07:56:06 AM
Guess I'm partial to a bit more color - and I tend to like the warmer colors, though I like blue too. Not fond of grays and dark colors, and find many of the dark colors very hard to read over the long term.
Post by: kimmer on April 15, 2006, 12:16:57 PM
1. Today I can reply, yesterday I could not.
2. Yesterday I dropped by and several threads where locked. Not sure why, as today they are unlocked.
3. Do we have new rankings or something? What is " Queen Typo"?
4. The bunny is back. :rabbit2:
Post by: MacHeadCase on April 15, 2006, 12:28:46 PM
Post by: jepinto on April 15, 2006, 04:20:24 PM
QUOTE
2. Yesterday I dropped by and several threads where locked. Not sure why, as today they are unlocked
One of the new features is the ability for moderators to lock a thread by right clicking *ahem* using whatever combination of keys you have programmed your more than one button mouse to bring up contextual menus, the folder on the far left of a topic title, and it will lock the thread.If you, like I use the right click *ahem*use whatever combination of keys you have programmed your more than one button mouse to bring up contextual menus, to tab browse, it will lock the thread before the moderator notices it.
There are still tweaks needing to be done, some, as Kris aid, may or may not be permanent. But keep giving the feedback!
Post by: Xairbusdriver on April 15, 2006, 05:02:00 PM
All you have to do is hold the 'left' button down for maybe 1/3 of a second and the contextural menu pops right up. One button, no additional keys, no *ahem* misteaks! Instead, MY right button performs something useful! It brings up a list of Shakespeare sonnet's! ( 'option-right-click' forces an Old English font )...
Post by: Ken on April 15, 2006, 06:18:04 PM
Not sure what caused it, but today I tried about six times with FF and Saf to add my old avatar and still no dice. Finally while still in Safari, I logged out and logged back in and went straight to "My Controls" and it took! No error message either. BTW, I'm getting that same error message: IPB WARNING [2] (null)() [ref.outcontrol]: output handler 'ob_gzhandler' cannot be used twice (Line: 0 of Unknown) on the bottom of every page.
Probably old news. I can see you guys (N gals) are working hard getting the new format whipped into shape. Good going. I got the "Jungle" banner today and I'm looking forward to exploring.
Post by: kimmer on April 15, 2006, 09:19:19 PM
QUOTE(MacHeadCase @ Apr 15 2006, 10:28 AM) <{POST_SNAPBACK}>
Queen Typo is a Custom member title I put in my member profile because I am always making typos...
:rabbit2: Okay, but I don't see where we can add a "custom member title". :confused:
QUOTE(jepinto @ Apr 15 2006, 02:20 PM) <{POST_SNAPBACK}>
One of the new features is the ability for moderators ... If you, like I use the right click *ahem*use whatever combination of keys you have programmed your more than one button mouse to bring up contextual menus, to tab browse, it will lock the thread before the moderator notices it.
is the ability for moderators ... If you, like I use the right click *ahem*use whatever combination of keys you have programmed your more than one button mouse to bring up contextual menus, to tab browse, it will lock the thread before the moderator notices it. 
No prob, and I'm delighted to know I'm not the only one who accidently hits key combos and does weird things. 
My life will be so much fun in a few months when I go back to my MAC and it's ONE button mouse. I've gotten used to this 3 button mouse -- even if it's uncomfortable for my hand.
I do appreciate all the hard work y'all are putting in. May the Easter Bunny leave extra chocolate in your basket. :rabbit2:
Post by: MacHeadCase on April 16, 2006, 09:02:33 PM
QUOTE(kimmer @ Apr 15 2006, 10:19 PM) <{POST_SNAPBACK}>
:rabbit2: Okay, but I don't see where we can add a "custom member title". :confused:
No prob, and I'm delighted to know I'm not the only one who accidently hits key combos and does weird things.
*Snip*
No prob, and I'm delighted to know I'm not the only one who accidently hits key combos and does weird things. *Snip*
You go into your My Controls and then on the left sidebar navigation thingy you click on Edit Profile Information.
First field you see in the page to fill out is Custom member title.
Post by: kimmer on April 16, 2006, 09:49:21 PM
That option was NOT there previously.
Now it is.
Maybe I'm going blind.
Or maybe I'm nuts.
Thanks MHC.
Post by: MacHeadCase on April 16, 2006, 10:00:18 PM
Post by: jepinto on April 17, 2006, 05:30:05 AM
QUOTE(kimmer @ Apr 16 2006, 10:49 PM) <{POST_SNAPBACK}>
Okay, who's playing tricks on me?
That option was NOT there previously.
Now it is.
Maybe I'm going blind.
Or maybe I'm nuts.
Thanks MHC.
Welcome to my world! It's small, but they know me here.....
That option was NOT there previously.
Now it is.
Maybe I'm going blind.
Or maybe I'm nuts.
Thanks MHC.
Post by: kimmer on April 17, 2006, 12:23:08 PM
QUOTE(jepinto)
Welcome to my world! It's small, but they know me here.....
It's a nice world, too. I think I'll stay, if that's okay with you.
Oh my gosh! I just saw the "add selected text as quote" button. Way Cool!
Post by: jepinto on April 17, 2006, 03:11:39 PM
Post by: Xairbusdriver on April 17, 2006, 03:33:42 PM
Post by: jepinto on April 17, 2006, 04:09:57 PM
Post by: RobW on April 17, 2006, 05:46:04 PM
(Just remember to enter the correct size in the width and height boxes.)
Post by: Gregg on April 17, 2006, 08:51:01 PM
QUOTE(kimmer @ Apr 17 2006, 12:23 PM) <{POST_SNAPBACK}>
Oh my gosh! I just saw the "add selected text as quote" button. Way Cool!
I don't see that. Which screen? Sounds like it should be a button that appears with every post. ???
Post by: RobW on April 17, 2006, 09:43:12 PM
QUOTE
I don't see that. Which screen? Sounds like it should be a button that appears with every post. ???
Gregg, if you select "fast reply" and then highlight a selection of text from a post that you wish to quote, a button will appear under your reply box which says "add selected text as a quote". If you push that, you'll get the highlighted text in quotes. (I had seen it earlier, but wasn't sure how I got it to show up till just now.
Post by: kimmer on April 17, 2006, 10:48:34 PM
QUOTE
kimmer, do you have that "avatar" in a transparent gif?
Well, I thought I'd uploaded the "white matt gif". Apparently I didn't.
Okay, should be all fixed now. 
May I shout to all of you ... I collected the rocks, took the pic ... and ABD took my pic and made me several small versions so that I can use them as avatars and on the banner for my board.My thanks to ABD!
Post by: PussEFoote on April 18, 2006, 12:10:45 AM
QUOTE(jepinto @ Apr 18 2006, 05:09 AM) <{POST_SNAPBACK}>
ok, I have enabled avatar uploads. I think. Try again, and let me know, or try to link to offsite and let me know.
Avatar uploaded to TS - easy peasy!!
BarbZ in Oz
Post by: Gregg on April 18, 2006, 07:41:14 AM
QUOTE
select "fast reply" and then highlight a selection of text from a post that you wish to quote, a button will appear under your reply box which says "add selected text as a quote".
It took several seconds, but works just as you said. Thanks!