Techsurvivors
Welcome to Techsurvivors => Tech => Topic started by: Highmac on January 31, 2017, 12:58:55 PM
-
The MBP got a knock last night and, suddenly, we had yellow tint all over the screen. We feared it could be the end of it - it's coming up to seven years old and we'd been told a while back at the Apple Store (by a genius) that Apple considered it too old to keep spares for.
A question to a "popular search engine" offered some possible solutions, but one suggested starting with the Apple Hardware Test (the MBP is still on Snow Leopard) and there was nothing to lose. Followed the instructions and set it off to make the fast test. That seemed to be just memory and motherboard and it confirmed all was well, so I went for the exhaustive one, which would take "about an hour". (The AHT is obviously a long-lived utility since it looked like something out of OS7).
We left it to get on with things but, while we were standing talking, out of the corner of my eye I saw something change on the screen, and the yellow tint had vanished and it had gone back to normal. Oh, and no faults were found.
Of course, only time will tell if the 'cure' is permanent...
-
The test probably added more bleach than you normally use, that got the yellow out!

Next time, as bleach can be dangerous if spilt on some things, take a look at "Displays" or "Monitors" (whatever it might be called on your OS) System Pref. There should at least be a default 'profile'. You can then run the fairly short "Calibrate" options and create your own 'profile' just for grins... and hopefully remove that yellow (or whatever the next color is) tint. From then on, you can simply open that Pref, swap your choices, and see if it works.
That may be faster than the rather long AHT method and it may not have anything to do with the problem, either!
Those 'profiles' are not readable in any app I have, including Xcode, although I haven't tried Terminal. They are ".icc" files used by printers/image apps/monitors/etc. to determine how much of each primary color, contrast, saturation, luminance, Moon phase, etc. Basically it’s a .plist file but probably in hexadecimal rather than XML like most others.