Welcome to Techsurvivors => Tech => Topic started by: Xairbusdriver on January 31, 2017, 04:48:35 PM
Title: Finally updated to Sierra
Post by: Xairbusdriver on January 31, 2017, 04:48:35 PM
A week after 10.12.3 came out and with no new (reported) problems mentioned, I decided it was safe to make the switch. Went smoothly, even using the App Store method.
I visit a forum, related to a Mac weather display app, quite often every day. Several people had reported that when they updated to macOS 10.12 Sierra that they had problems keeping that software connected to their weather monitoring hardware. The solution was found to be the fact that this update usually resets the Energy Saver System Pref to have the Computer Sleep time the same as the Display Sleep value. Changing the Computer Sleep time to "Never" solved the problem!
Today, the first restart of the iMac after the update, I was greeted to a screen full of "Disk Ejected improperly!!! Please don't do that again!" Notifications. The first good thing I learned is that one does not have to click every single Notifications to clear off the screen. At least, if all the Notifications have the same message, the System is smart enough to close all of them after one clicks a couple of them.
The second good thing I learned, after swapping drives/cables/ports, was that the problem turned out to be exactly what the folks at the other forum had reported; my Energy Saver settings had reverted to having the Computer Sleep set to the same '10 minute' value as the Display Sleep setting. I changed the Computer Sleep setting back to "Never" and things are doing fine now, even though the Display has gone to sleep several times.
What confuses me is that I still have the "Put hard disks to sleep when possible" checked! Seems counter-intuitive to have the "Disk Eject" Notifications pop up when the Computer sleeps, but not when the disks sleep! Apparently, the OS/machine losing 'awareness' of the external drives when the computer sleeps?
Title: Finally updated to Sierra
Post by: jchuzi on January 31, 2017, 07:33:00 PM
My Energy Saver pref pane only has a time setting for sleeping the display, not setting a time after which hard disks will sleep. To do that, I have to use Cocktail. Is your system different somehow? Does this depend on your particular Mac model? The above is true for my iMac but I can't speak for a laptop.
Title: Finally updated to Sierra
Post by: Xairbusdriver on January 31, 2017, 08:40:48 PM
For your viewing pleassure...
The iMac (macOS 10.12.3 Sierra)
+ + + + + + + + + + + + +
A MBP (Yosemite)
Title: Finally updated to Sierra
Post by: jchuzi on February 01, 2017, 06:04:04 AM
Very interesting. My iMac lacks the Computer Sleep slider in the Energy Saver pref pane.
Title: Finally updated to Sierra
Post by: Xairbusdriver on February 01, 2017, 08:02:12 AM
Different strokes for different folks?! My iMac is different in many ways, I have fingerprints on the screen where I sometimes point at things!!!
Title: Finally updated to Sierra
Post by: jchuzi on February 01, 2017, 08:16:36 AM
I don't know if this means anything, but when I changed the timing on sleep via Cocktail, I had to restart to have it go into effect. Maybe there's a difference in your model iMac and mine.
Title: Finally updated to Sierra
Post by: jchuzi on February 01, 2017, 07:17:33 PM
I think that I have a viable idea about this. My iMac has a fusion drive, so "sleep" may not apply.