Techsurvivors

Archives => 2003 => Topic started by: jguti on August 26, 2003, 08:13:23 AM

Title: Networking a PowerMacG3 (Beige)
Post by: jguti on August 26, 2003, 08:13:23 AM
I need to use the same phone line simultaneously with two 'puters mentioned above via a wire connection (secure and $ reasons) for internet use.  What is involved in doing this?

Both 'puters have the ethernet jacks installed in them.
Title: Networking a PowerMacG3 (Beige)
Post by: kelly on August 26, 2003, 09:06:28 AM
I don't suppose you're running OS X and Windows XP? huh.gif

That combination would help.

Lots of somewhat confusing information here.

http://www.practicallynetworked.com/sharin.../sharingdup.htm

All in all. It might not be worth it. huh.gif
Title: Networking a PowerMacG3 (Beige)
Post by: giantmike on August 26, 2003, 09:53:29 AM
Here are my thoughts on the situation.

Buy a cable/dsl router with dial-up backup (the SMC routers I reviewed on my site have this). Basically, you would connect your computers to the router via ehternet, and then connect a PC modem to the router. Set up the router to use the modem, and it should connect any time you don't have an ethernet connection to the outside world (this would be always). Of course, this setup would probably keep your internet connection active 24 hours a day, and that may add up on your phone bill. You could always shut off the router when you don't want to be on the internet.

While I have never tried it, I would assume it would work.
Title: Networking a PowerMacG3 (Beige)
Post by: Bernie on August 26, 2003, 09:52:18 PM
Maybe this will help.
http://www.macworld.com/2000/12/bc/01howtorouter/
 whistling.gif