Techsurvivors
Archives => 2003 => Topic started by: dakota on September 11, 2003, 09:44:26 AM
-
I have been duplicating my HD onto another drive with Retrospect. Everything was fine till now. I remain with 3 files left to copy and can't figure out how to remedy the situation. I have removed privileges from the cloned drive. Report is as follows:
+ Executing Immediate Duplicate at 9/11/2003 10:24 AM
Warning: volume Backup Drive has the Ignore ownership setting enabled.
- 9/11/2003 10:24:23 AM: Copying Macintosh HD…
Can't read file “BootCache.playlist”, error -5000 (server: no privileges), path: “Macintosh HD/private/var/db/BootCache.playlist”.
Can't read file “SystemEntropyCache”, error -5000 (server: no privileges), path: “Macintosh HD/private/var/db/SystemEntropyCache”.
Can't read file “netinfo_local.pid”, error -5000 (server: no privileges), path: “Macintosh HD/private/var/run/netinfo_local.pid”.
Trouble writing files, error -5000 (server: no privileges).
9/11/2003 10:35:57 AM: Execution incomplete.
Remaining: 3 files, 74 KB
Completed: 191 files, 173.0 MB
Performance: 20.7 MB/minute
Duration: 00:11:34 (00:03:14 idle/loading/preparing)
Quit at 9/11/2003 10:36 AM
-
Never used it.

"Another possibility is that you've got some kind of security software installed on the machine you're backing up, and that that software is preventing you from accessing a protected area of the hard drive. Check to see if there is any software running on that machine fitting this description and try disabling it."
http://www.dantz.com/index.php3?SCREEN=kba...=KBASE&id=26717
http://www.dantz.com/index.php3?SCREEN=kba...=KBASE&id=27858
http://www.dantz.com/en/support/index.dtml
-
dakota:
Sounds to me that Kelly might be right. One solution is to backup with Retrospect logged in as the ROOT user. This should circumvent any system based privileges that are getting in the way. Sometimes even admin users can't manipulate files that are owned by root. Third party security and virus protection needs to be disabled before you run Retrospect.
-
What I just discovered is that it is only happening with my LaCie Firewire 20 gig which is about two years old. It is NOT happening with the new 160 gig LaCie. On that drive, everything is copied.
-
The older fw drives were not supported very well, they needed an updated oxford 911 bridge chip, and LaCie is notorious for its compatabilty. The drive probably is not compatable with the newer versions of OS X.