Messages

1

2003 / HP all-in-one + X.1.x + problems

« on: October 24, 2003, 02:29:41 AM »

At the begining of the installation it should ask him for the printer series, then it  goes thru install. If it doesn't show up in the scan, then go to the HP Photo and Imaging Director which should have been install in Applications/ Hewlett-Packard/Photo and Imaging Software/. In the imaging director pick settings, choose device and it should say psc  #? series. If not then go to the Utility folder / Print Center and click- add printer, should say HP AiO USB Hiiglight that.  Sorry thats all I can remember about the installation...Good Luck

2

2003 / Desperate for help with old SuperMac

« on: February 14, 2003, 03:43:00 AM »

FWB Software-Put out Hard Disk Toolkit, like Drive Setup but with more options.Problem was,it seemed like everytime a new or upgraded OS came out one had to buy a upgrade to FWB.I also have a 2 gig hard drive that came with this umax that I no longer use,a 233 cpu,some memory thats not getting used,3 sticks,(no room),so if you can use,you can have.
 
Forgot this earlier, make sure video card is in first PCI slot.Have you moved the memory chips to the A-1 B-1 A-2 B-2 slots.To remove push tabs at both ends of slot down,remove chip. When installing push chip straight down until tabs snap up.

3

2003 / Desperate for help with old SuperMac

« on: February 13, 2003, 12:30:00 AM »

You won't be able to move the drive to the G4 unless you have a scsi card.I might be able to get an old FWB to you if you want to try it.It can help to eliminate some things. Couple more questions. Can you see the make of the video card? Does the HD ribbon go to the motherboard or to an E100 card in the PCI slot? This just helps to let me know whats inside.Hope there is no hurry on this project.

4

2003 / Desperate for help with old SuperMac

« on: February 12, 2003, 05:55:00 PM »

To add to the list of options, the S900's Hard Drives were formated using FWB 2.0.6.If someone tried to use it to install a newer system and didn't have a clue as to what they were doing ( a trick that I once perfected on my own s900 ) the symptoms were as you discribed. If you have or have access to an older version of FWB, I would use it to try and mount the drive.I agree with taking the hard drive out and putting it into another machine, maybe the 7100 if it works. Or trying another in its place.How many ram slots are used? You will need at least 24mb to run with VM turned on.There is list of things I had to do to tune my computer.Not enough space here