Author Topic: Beige G3 Problems (Read 4903 times)

giantmike · « **Reply #15 on:** July 01, 2003, 08:24:41 PM »

It doesn't make a lick of difference if you put PC 66, PC 100, or PC 133 RAM into that machine. As long as the RAM fits the Apple specs, it should work fine. Of course, some RAM modules are just bad, and nothing can be done about them.

cdub1988 · « **Reply #16 on:** July 02, 2003, 08:47:48 AM »

George -

Those 133 chips probably look just like PC100 chips that may have been installed before.

From the horse's mouth:

QUOTE

Notes:
DIMMs must be:
3.3 volt(V) unbuffered, 64-bit wide, 168-pin
100MHz/10ns cycle time or faster

AppleSpec - Power Macintosh G3 Mini Tower

As long as the voltage is right, you should be good to go.

Even if the voltage was higher, it may still work, though I would never suggest it.

Hope that helps.

Take care.

Chris

george · « **Reply #17 on:** July 02, 2003, 04:12:22 PM »

now running fairly reasonably well in that the 128mb ram that came with the m/c is in place along with two separate unknown 64mb sticks.
many

to all particpants for their contributions.
George.
Till the next glitch!

Gregg · « **Reply #18 on:** July 03, 2003, 07:53:12 AM »

George, don't wait for a glitch before coming back!

george · « **Reply #19 on:** July 03, 2003, 08:54:05 AM »

Gregg ,

QUOTE

Till the next glitch

was intended to be said tongue in cheek.
Since arriving and joining ts[SIZE=14]I now find myself cheerfully addicted and require a daily fix.
George

george · « **Reply #20 on:** July 03, 2003, 08:56:04 AM »

made a mess of that reply.
George

Gregg · « **Reply #21 on:** July 03, 2003, 12:02:19 PM »

Good! This guy

is as close to "tounge and cheek" that we've got to choose from. Conveys the feeling, but keeps it brief. You're allowed up to eight in one post, I believe.

kelly · « **Reply #22 on:** July 04, 2003, 08:19:21 AM »

I knew what you meant George.

That switch was for a tower. You probably have one somewhere.

If things are working though, don't bother with it.

News:

Author Topic: Beige G3 Problems (Read 4903 times)